DC5-24V 8A*3CH 24A RGB LED Controller 201 with 2.4GHz Touch Remote Control

Outlet & Switch CombosTechnical parameterscontrollerWorking temperature: -20-60 degreesPower supply voltage: DC5V-24VOutput: 3 channelsConnection method: common anodeOverall dimensions: L120W62H24mmPacking size: L185W145H52mmNet weight: 226 gramsGross weight: 320g<;1W<;8A (per channel)<;288W, 24V: 576Wtouch remote controlWorking temperature: -20-60 degreesPower supply mode: AAA*3Supply voltage: 1.5V*3Transmission frequency: 2.4GhzStandby power consumption: 0.015mWStandby current: 60uAWorking current: 200uAEmission current: 10mARemote control distance: about 30mStandby time: 6 monthsRemote control weight: 94g2. Button descriptionThere are a total of 64 touch buttons (points) on the touch remote control panel. The functions of each button are as follows:(1) On/off button: The controller output can be turned on/off in any state;(2) Pause button, in dynamic mode, can stop the controller in the current state;(3) Mode increase key. When the current control mode is pulley mode, if you want to realize the M+ key mode, you can press this key;(4) Mode reduction key. When the current control mode is the pulley mode, if you want to achieve the M+ key mode, you can press this key;(5) Brightness increase key. Each time this key is pressed, the brightness level increases by 1, with a total of 25 levels;(6) Brightness reduction key. Each time this key is pressed, the brightness level decreases by 1, with a total of 25 levels;(7) Speed ​​increase key. Each time this key is pressed, the speed level increases by 1, with a total of 100 levels;(8) Speed ​​reduction key. Each time this key is pressed, the speed level decreases by 1, with a total of 100 levels;(9) Multi-color pulley touch buttons, static mode selection button, more than 55 touch points, the button has two functions:1) Pulley static color selection key, so when the current control mode is M key mode (color), if you must achieve pulley static color, you can press this key;2) Pulley color switching key can switch the static color shown on the pulley.3. Power managementIf you stop using the remote control for more than 15-20 seconds, the remote control will automatically enter standby mode to extend battery life. The color ring cannot be used at this time. The next time you use it, touch the button to wake up the remote control, and then the remote control will return to normal working status.Oscillation frequency: NAConnection method: Period: 2Voltage: 5-24VMaterial: metalWattage: 192Power supply: DCmaximum. Load power: 192Remote control distance: 10Applicable lights: Not applicableControl method: NAOrigin: Mainland ChinaProduct Type: RGB Controller

• Outlet & Switch Combos