SW MEGICOLIM Privacy Matte White Window Film, White Frosted Window Sticker, Adhesive Opaque Window Tint for Home, Office, Bathroom, Meeting and Living Room, 60Inch x 100Feet

Specification: Available Length: 60in, 78.7in, 10ft, 13.1ft, 16.5ft, 26.2ft, 33ft, 66ft, 100ft(Any length can be customized, please contact us) Available Width: 17.7in, 20in, 24in, 35.4in, 60in(Any width can be customized, please contact us) Material: PET Thickness: 0.28mm Features: self-adhesive, anti uv, heat control, sun blocking, waterproof, anti-friction, anti-glare, easy to cut and install Always Protected, Get Pleasant Light: With the perfect privacy protection, the window privacy cling can provide good daytime privacy but still allows natural light in. Installation Steps: Step 1. Trim films to the size you want (a little biger than you need) Step 2. Keep Window or Glass clean Step 3. Wet the Window or Glass with much soapy water Step 4. Remove the adhesive film from backing liner ( Please make sure you have removed it before you apply the matte window film to glass) Step 5. Wet the adhesive film with much soapy water Step 6. Set up film on glass Step 7. Squeegee away water and air bubbles with scraper Step 8. Cut off margins and enjoy your works Quick tip: 1. In order to easily remove the protect backing film, simply use 2 pieces of tape to apply to both sides of the corners and pull.Please spray a lot of water before installation. Its better to watch the installation video of window film on YouTube before installation.

• ⭐24 Hours Privacy Protection - Advanced frosted design provides 95% privacy protection but still allows light in, diffuse direct sunlight to prevent glares, so that you can work and study under softened sunshine and protect your daily life from being watched and disturbed.
• ⭐UV Blocking Opaque Window Film - Block out more than 99% of UV rays, which can protect your skin and prevent furniture from aging and fading, prolong its service life.
• ⭐Adhesive Matte White Window Tint - This self adhesive window privacy film is of glue design, the adhesive strength is not strong, so please do not worry to leave residue after removing. And it is very sticky as long as it is sprinkled with water on the glue side and window. There is no chemical release, very easy to install, just make sure window surface is completely clean and absolutely free of any blemishes.
• ⭐Wide Applications - Smooth glass surface windows, sliding doors, bathroom, living room, balcony, storage room, meeting room, office partition, hotel or any place where need a high privacy.
• ⭐NOTE - In order to easily remove the backing liner, simply use 2 pieces of tape to apply to both sides of the corners and pull. And please spray as much soapy water as possible on the glue side and glass before putting it on the window, which will reduce the bubbles. And two people work together will be better.